How to Fix No Signal to Monitor

Sometimes when using an old computer the monitor won't connect to the tower. To resolve this follow these simple steps.

1. Check the Power Cable and make sure its firmly connected
2. Check the Monitor Cable and make sure its firmly connected

If the above is true then it is quite possible that the ram might need to be reset in order to do this:

1. Remove the side cover of the tower
2. Find the ram which will look something like what is shown below
3. Gently push down the two clips holding the ram
4. Remove the ram and clean it with a dry cloth
5. Replace the ram in its initial position by pushing down firmly, the clips will snap the ram in place if successful